Skip to content

Bachelor of Technology / Engineering

  • 5 projects
  • 27 branches
  • 12 universities
  • 4 states

@btech5 new this month

B.Tech / B.E. final year projects with source code, synopsis, PPT and viva Q&A — mapped to 18 university schemes.

5 complete bundles so far. Read them, understand them, then build your own.

Engineering · Undergraduate

More info
Universities mapped
VTU · Anna University · JNTUH · AKTU · GTU · SPPU · Mumbai University · KTU · RGPV · MAKAUT · Osmania University · BPUT
Where the project sits
  • VTU 2022 Scheme (OBE/CBCS): Major Project Phase-II (BCS786), Sem 7
  • Anna University Regulation 2021: Project Work / Internship (CS3811), Sem 8
  • JNTUH R22: Project Stage-II incl. Seminar, Sem IV-2
  • AKTU NEP scheme (3rd yr 2024-25, 4th yr 2025-26): Project-II (BCS851), Sem 8
  • GTU 2018-19 pattern (NEP BE0x codes from 2024 admits): Internship / Project (3180701), Sem 8
  • SPPU 2019 Course (2024 NEP pattern rolling in): Project Stage II (410256), Sem 8
  • Mumbai University Rev-2019 'C' Scheme: Major Project 2 (CSP801), Sem 8
  • KTU 2019 Scheme (2024 scheme for 2024 admits): Project Phase II (CSD 416), Sem 8
  • …and 10 more schemes
For educational purposes only

Unlock any B.Tech / B.E. project

See project packs, from 1,200 rupees per project

The locked half of every bundle: the PPT with speaker notes, source code, READMEFIRST, instructions and every viva answer. Credits work on any project, in any degree.

One-time. No subscription, no auto-renew, no drama.

B.Tech / B.E. projects

  2. Two-Row Push Seed Drill with 3D-Printed Swappable Metering Plates for Groundnut and Ragi, with Field Spacing Trials

    @manual-seed-drill-3d-printed-metering-plates-groundnut-ragi

    B.Tech / B.E.

    Swap a PLA plate, sow a different crop: design, fabrication and measured missing and multiple indices on a Pune-district plot.

    Free preview
    • CAD lab: Fusion 360 / SolidWorks (industry-standard) for parts and assembly
    • CURA slicing and FDM printing of PLA/PETG metering plates
    • MS square-tube frame: arc welding, drilling, chain-sprocket drive
    • Sticky-belt laboratory metering test
    • +2

    Mechanical Engineeringintermediate14 weeksMaharashtra

  4. Stilt-Parking Soft Storey in a G+4 RC Apartment (Seismic Zone III): Pushover Analysis and Retrofit Comparison

    @soft-storey-g4-zone-iii-pushover-retrofit

    B.Tech / B.E.

    Bare, infilled-with-open-ground and three retrofit models to IS 1893 (Part 1):2016 and IS 456, compared on capacity curves, drift and hinge states.

    Free preview
    • ETABS (industry-standard) or OpenSees (open-source) for nonlinear static analysis
    • IS 1893 (Part 1):2016, IS 456:2000, IS 13920:2016, IS 875 (Parts 1 and 2)
    • Equivalent diagonal strut modelling of masonry infill (IS 1893:2016 cl. 7.9)
    • ASCE 41-17 / FEMA 356 plastic hinges; FEMA 440 performance point
    • +2

    Civil Engineeringadvanced16 weeksTelangana

  5. M25 Concrete with Sugarcane Bagasse Ash and Quarry Dust from the Mandya Belt: Strength, Cost per m³ and Embodied CO₂

    @m25-bagasse-ash-quarry-dust-concrete-strength-cost-co2

    B.Tech / B.E.

    IS 10262:2019 mix design, 7- and 28-day IS 516 tests and a rupee-and-carbon table for partial cement and sand replacement.

    Free preview
    • IS 10262:2019 concrete mix proportioning
    • IS 456:2000, IS 383:2016, IS 269 (OPC 53)
    • IS 516 (Part 1/Sec 1):2021 compressive and split tensile strength
    • Compression testing machine (2000 kN), slump cone, Vicat, Le Chatelier
    • +2

    Civil Engineeringintermediate14 weeksKarnataka

B.Tech / B.E. branches

Other Engineering degrees

M.Tech / M.E.@mtech · Master of Technology / Engineering2 projectsDiploma (Polytechnic)@diploma · Diploma in Engineering4 projects

Other Engineering degrees

M.Tech / M.E.@mtech · Master of Technology / Engineering2 projectsDiploma (Polytechnic)@diploma · Diploma in Engineering4 projects
All 51 degrees
For educational purposes only

Study it. Cite it. Don't photocopy it. Your viva will find out.

© 2026 OnlyProjects · For educational purposes only.